Description

The Microtek UPS LEGEND 1000 is a microprocessor-based Line Interactive UPS offering reliable power backup and protection for computers and other compatible electronic equipment.

The UPS incorporates Boost & Buck Automatic Voltage Regulation (AVR) to help stabilize voltage fluctuations. Its wide input voltage range of 140V to 300V AC allows it to operate effectively in environments where input voltage may fluctuate significantly.

During a power interruption, the UPS switches to battery mode and provides a 230V AC nominal output. The typical transfer time is 4–8 ms, helping minimize interruption to connected equipment. Battery-mode output uses a Modified Sine Wave waveform.

The Microtek LEGEND 1000 uses two 12V / 7Ah Sealed Maintenance Free (SMF) batteries. The batteries typically recharge to 90% capacity in approximately 6 hours after complete discharge, according to Microtek’s brochure specifications.

Designed for Reliable Power Protection

The UPS provides protection against overload, discharge and overcharge and includes features such as auto restart while AC is recovering, cold start and off-mode charging. Microtek also lists a generator compatibility option for this model.

Suitable Applications

The Microtek UPS LEGEND 1000 is suitable for compatible:

Desktop Computers
Security & Surveillance Systems
Broadcast Studio Equipment
Office and IT equipment
Other compatible electronic loads within the UPS capacity

Microtek’s product literature specifically identifies Desktop, Security & Surveillance and Broadcast Studio applications.

Key Features

1000VA / 600W capacity
Microprocessor-based Line Interactive UPS
Boost & Buck AVR for voltage stabilization
Wide 140V–300V AC input voltage range
230V AC nominal output
Typical 4–8 ms transfer time
Modified Sine Wave output in battery mode
SMF battery technology
12V / 7Ah × 2 batteries
Protection against overload
Protection against discharge and overcharge
Automatic restart while AC power is recovering
Cold Start Function
Easy Off-Mode Charging
Generator Compatibility Option
Built-in low-battery auto switch-off
Noise level below 40 dB
Suitable for desktop, surveillance and broadcast applications

Specification	Details
Brand	Microtek
Model	UPS LEGEND 1000
UPS Type	Line Interactive UPS
Capacity	1000VA / 600W
Input Voltage Range	140V–300V AC
Input Frequency	50Hz ± 10%
Output Voltage	230V AC Nominal
Output Frequency (Battery Mode)	50Hz ± 1Hz
Output Waveform (Battery Mode)	Modified Sine Wave
Transfer Time	Typical 4–8 ms
Maximum Rating	1000VA
Battery Type	SMF – Sealed Maintenance Free
Battery Rating	12V / 7Ah × 2
Recharge Time	Approx. 6 hours to 90% after complete discharge
Operating Temperature	0°C–40°C
Relative Humidity	0–90% RH, non-condensing
Noise Level	Less than 40 dB
Dimensions (L × W × H)	315 × 130 × 183 mm
Net Weight	Approx. 8.02 kg
Gross Weight	Approx. 8.60 kg

1. What is the capacity of the Microtek UPS LEGEND 1000? +

The Microtek UPS LEGEND 1000 has a capacity of 1000VA / 600W.

2. What type of UPS is the Microtek LEGEND 1000? +

It is a Line Interactive UPS with microprocessor-based control and Boost & Buck AVR.

3. What is the input voltage range of the LEGEND 1000? +

The UPS supports a wide input voltage range of 140V–300V AC.

4. What battery does the Microtek LEGEND 1000 use? +

It uses 2 × 12V / 7Ah Sealed Maintenance Free (SMF) batteries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Microtek Online UPS 1KVA 1PH:1PH 36V-IB MAX+

Microtek UPS Legend 750M – 650VA/360W Line Interactive UPS

Microtek Legend 1000 UPS